Horiba MICROS 60 ABX Reagents 3 Part CBC Analyzer Diluent Clean
Intended Use of Micros Reagents To be used for blood cell counting, sizing, and WBC differentiation, hemoglobin determination on ABX ( Horiba ) MICROS 60 Hematology Analyzers.
Specification
| Reagents on ABX MICROS 45 MICROS 60 |
| Cat. No | Description | Pack Size |
| DWX-30610 | DILUENT-M | 20L |
| DWX-30611 | LYSE-M | 1L |
| DWX-30612 | RINSE-M | 1L |
| DWX-30613 | CLEAN-M | 500ml |
Attention of CBC Reagents
1. This product is an in vitro diagnostic reagent;
2. Pay attention to seal and prevent pollution;
3. Read the instructions carefully before use, and should stop using them when they exceed the period of validity;
4. If the product freezes, it should be completely defrosted at room temperature and used after mixing.
5. Waste liquid, waste, residual products and treatment of contaminated packaging materials, please comply with local regulations;
6. It is strictly forbidden to eat and avoid contact with eyes and skin. Once Contact your eyes and skin,please clean immediately with plenty of water and seek medical advice.
Limitations of Detection Method
If the temperature of the reagent is out of the specified range, the specimen's measurement parameters may appear abnormal. If in this condition, please confirm the measurement parameters with the microscopy method. Please refer to the instrument operation manual for details.
Temperature of Stock
The product should be stored in 2℃-38℃ and the shelf life is 2 years.
After opening, it is used in 15℃-30℃, and the validity is 60 days.
Some product questions you may want to ask:
1) What is the principle of 3 part hematology analyzer?
In a 3-part analyzer the cell counting is based on the Coulter Principle. All hematology analyzers utilise Coulter's Principle. 3-part differential cell counter employs Coulter's Principle to determine the size as well as volume of the cells. Coulter's principle is applied employing two electrodes.
2) What is the diluent in the hematology analyzer?
The diluent for the hematology analyzer comprises sodium chloride, sodium sulfate, a phosphate buffer agent, ethylene diamine tetraacetic acid, 1-pyridone-2-sulphur and formaldehyde, and the pH value of the solution is 6.5-7.4, and preferably is 7.2; the content of each component is preferably as follows: 5g/L of ...
3) What is the use of Lyse in hematology analyzer?
It is used to lyse (destroy) red blood celis for hemogiobin determinations or aid in the counting of white blood cells. Applicable to the hematology analyzers.
Product Tags:
|
|
Horiba MICROS 60 45 ABX Reagents 3 Part CBC Analyzer Diluent Rinse Clean Images
|
