| SYSMEX UF-1000i ( with barcode ) |
| Cat. No | Product Name | Description | Pack Size |
| DWN-10009 | Sheath-UF | SHEATH-Ⅱ | 20L |
| DWN-10010 | URI-DYESED | SED-STAIN | 29ml×2 |
| DWN-10011 | URI-DYEBAC | BAC-STAIN | 25ml×2 |
| DWN-10012 | URI-DILSED | SED-DILUENT | 2.1L×2 |
| DWN-10013 | URI-DILBAC | BAC-DILUENT | 2.1L×2 |
| DWN-10014 | URI-UF | CLEANER 3 | 1L |
How to deliver the product to the hot area?
The preservation of hematology reagents is 2-35 degrees temperature. Therefore if the temperature is more than 35 degrees, we will arrange the shipping with cold chain transportation to guarantee the quality of reagents.
Limitations of Detection Method
If the temperature of the reagent is out of the specified range, the specimen's measurement parameters may appear abnormal. If in this condition, please confirm the measurement parameters with the microscopy method. Please refer to the instrument operation manual for details.
Storage
The product should be stored in 2℃-35℃ and the storage period is 2 years. After opening the bottle, it is used in 15℃-30℃, and the validity period is 60 days.
Attention
1. This product is an in vitro diagnostic reagent;
2. Pay attention to seal and prevent pollution;
3. Read the instructions carefully before use, and should stop using them when they exceed the period of validity;
4. If the product freezes, it should be completely defrosted at room temperature and used after mixing.
5. Waste liquid, waste, residual products and treatment of contaminated packaging materials, please comply with local regulations;
6. It is strictly forbidden to eat and avoid contact with eyes and skin. Once Contact your eyes and skin,please clean immediately with plenty of water and seek medical advice.
